Veteran Owned
Electrical Panel Upgrades in San Antonio, TX - C.S.W. Power Solutions San Antonio
License ##TECL31793 · CPS Energy Approved Contractor

Electrical Panel Upgrades in San Antonio, TX

Is your electrical panel outdated or overloaded? We upgrade 100-amp panels to 200-amp, replace Federal Pacific and Zinsco panels, and coordinate directly with CPS Energy for service upgrades — all permitted and inspected.

Electrical Lic.#TECL31793
Plumbing Lic.#RMP46592
HVAC Lic.#TACLA26479R

Veteran-Owned Panel Upgrade Contractor in San Antonio

C.S.W. Power Solutions is a veteran-owned electrical contractor specializing in panel upgrades across San Antonio. All work is permitted and inspected. Electrical License #TECL31793. As a VA-Certified Builder (ID #09311), we are authorized to perform panel upgrades under VA Specially Adapted Housing grants for disabled veterans.

Veteran & Military Discount Available — ask when you call.

When Do You Need a Panel Upgrade?

Many San Antonio homes still have 100-amp or even 60-amp electrical panels that cannot safely handle modern electrical loads. Adding a generator, EV charger, or major appliance almost always requires a panel upgrade. We coordinate directly with CPS Energy for utility disconnects and service upgrades.

  • 100A to 200A Panel Upgrade — $1,800–$5,500
  • 200A to 400A Panel Upgrade — $4,500–$12,000
  • Federal Pacific / Zinsco Replacement — $1,500–$4,000
  • Subpanel Installation — $500–$1,500
  • Single Breaker Replacement — $100–$200
  • Code Compliance Corrections
  • GFCI & AFCI Breaker Upgrades
  • CPS Energy Coordination

Electrical Panel Upgrade Cost in San Antonio

ServiceTypical Range
100A to 200A Panel Upgrade$1,800 – $5,500
200A to 400A Panel Upgrade$4,500 – $12,000
Federal Pacific / Zinsco Replacement$1,500 – $4,000
Subpanel Installation$500 – $1,500
Single Breaker Replacement$100 – $200
Whole-Home Rewiring$4,000 – $15,000+

A 200A to 400A upgrade is always more expensive than a 100A to 200A upgrade. The 400A service requires heavier service entrance wire, a new meter base, and CPS Energy coordination — significantly more work than a standard upgrade. Most SA homes only need 200A; 400A is for homes over 3,000 sqft or with multiple EV chargers, pools, or workshop equipment. Free on-site estimates provided.

Our Panel Upgrade Process

1

Panel Evaluation

We inspect your existing panel, wiring, meter base, and service entrance to identify what needs to be upgraded or replaced.

2

Scope & Quote

We provide a detailed, itemized quote covering the new panel, breakers, meter base (if needed), labor, and permit fees.

3

CPS Energy Coordination

We coordinate with CPS Energy for any required service upgrades or utility disconnects before installation.

4

Permit Pull

We pull the electrical permit from the City of San Antonio Development Services Department.

5

Installation

We install the new panel, transfer all circuits, label every breaker, and restore power — typically in one day.

6

City Inspection

We schedule and pass the city electrical inspection, then provide you with the signed permit for your records.

Common Reasons for Panel Upgrades

Panel upgrades are frequently required for generator installations, EV charger installations, and HVAC system replacements. They are also a common component of home remodels and damage restoration projects. If your home has a Federal Pacific or Zinsco panel, replacement is strongly recommended due to known safety issues. C.S.W. Power Solutions handles the entire process — from evaluation and permitting to installation and city inspection. For a full cost breakdown, visit our electrical panel upgrade service page or read our blog for detailed pricing guides.

One Contractor. All Trades.

C.S.W. Power Solutions is more than an electrical contractor. As a licensed general contractor, we also provide plumbing and HVAC services in-house. Projects that require multiple trades — like home remodels or damage restoration — are managed under one roof for faster completion and lower cost. No subcontractor markup. No scheduling conflicts. One point of contact from start to finish.

Electrical Panel Upgrade FAQs

Yes. Panel upgrades from 100 or 150 amps to 200 amps are one of our most common jobs. We pull permits and coordinate CPS Energy.
Yes. Most electrical work in San Antonio requires a permit from the Development Services Department. This includes panel upgrades, new circuit installations, outlet additions, and any work that modifies your home's electrical system. C.S.W. Power Solutions pulls all necessary permits and schedules inspections as part of every job.
Signs you need a panel upgrade include frequently tripping breakers, flickering lights, a panel that's warm to the touch, a Federal Pacific or Zinsco panel (known fire hazards), or a panel rated below 200 amps. If your home was built before 1990 and still has the original panel, an upgrade is strongly recommended for safety and to support modern electrical demands.
A standard 100A to 200A panel upgrade in San Antonio typically costs $1,800–$5,500. Upgrading from 200A to 400A — required for large homes with heavy electrical loads — typically costs $4,500–$12,000. We provide a detailed estimate before any work begins.
Yes. We provide comprehensive electrical safety inspections for homebuyers, sellers, and homeowners concerned about their system's condition. Our inspection covers the panel, wiring, outlets, GFCI/AFCI protection, grounding, and overall code compliance. We provide a detailed written report with findings and recommendations.
A standard 200-amp panel upgrade takes 6 to 8 hours for the installation itself. Power is typically off for 4 to 6 hours during the swap. The full project timeline — including permit approval and city inspection — is usually 5 to 10 business days from the time you approve the estimate.
Many insurance companies require replacement of Federal Pacific Stab-Lok, Zinsco, and Pushmatic panels as a condition of coverage. If your insurer has flagged your panel, we can provide a detailed estimate and coordinate directly with your insurance company if needed.
Plumbing Lic. #RMP46592HVAC Lic. #TACLA26479RElectrical Lic. #TECL31793

Need a Panel Upgrade?

Contact C.S.W. Power Solutions for a free electrical panel evaluation.

Financing Available · Veteran & Military Discount · Free Estimates