Open vanity cabinet under a white sink with braided supply lines, quarter-turn valves, P-trap.
License RMP #46592

Whole-House Repipe in San Antonio

A whole-house repipe replaces the water supply lines running through your home. Repeat pinhole leaks, rust-colored water, dropping water pressure, or original galvanized, polybutylene, or CPVC piping are the usual reasons San Antonio homeowners repipe. C.S.W. Power Solutions repipes in PEX or copper and patches the openings afterward.

Call 24/7, anytime, day or night.

Free Estimates

Texas Electrical ContractorTECL #31793
Responsible Master PlumberRMP #46592
Texas Air Conditioning & Refrigeration Contractor (commercial refrigeration endorsement)TACLA00026479R

Request a Repiping Estimate

Tell us the age of the home, the pipe material if known, and your ZIP code. A licensed CSW plumber will follow up.

Request A Free Estimate

Call 24/7 at (210) 880-2864 or book your estimate to discuss your project.

Repiping Services

C.S.W. Power Solutions provides complete repiping services for San Antonio homes and businesses. Our licensed plumbers (License RMP #46592) replace all supply lines throughout your home with new PEX or copper pipe, restoring full water pressure and eliminating the risk of leaks from aging pipes.

  • Whole-house PEX repiping
  • Whole-house copper repiping
  • Galvanized pipe replacement
  • Polybutylene pipe replacement
  • CPVC pipe replacement
  • Water line replacement
  • Drywall patching and restoration
  • City permitting and inspection

When Your Home Needs Repiping

Rusted galvanized steel pipe threaded into an elbow fitting beside new red and blue PEX tubing.

Pipe Types That Need Replacement

  • Galvanized Steel: Common in homes built before 1960. Corrodes from the inside, causing rust-colored water and restricted flow.
  • Polybutylene: Used from 1978 to 1995. Known to crack and fail without warning. Most insurance companies will not cover homes with polybutylene pipes.
  • CPVC: Becomes brittle over time, especially in hot water lines. Prone to cracking at joints.
  • Copper (40+ years): Develops pinhole leaks from corrosion, especially with San Antonio's hard water.

Repiping as Part of a Larger Project

Repiping is often most cost-effective when combined with other work. If you are planning a home remodel, the walls are already open — making it the ideal time to replace old pipes. Homes with frequent slab leaks often benefit from a full repipe that reroutes supply lines through the attic or walls, eliminating the under-slab pipes entirely. After repiping, installing a water softener protects your new pipes from San Antonio's hard water.

Repiping Cost in San Antonio

ServiceTypical Range
PEX Repipe — Average Home (6–12 fixtures)$4,000 – $8,000
PEX Repipe — Larger Home (13+ fixtures)$6,500 – $15,000
Copper Repipe — Average Home$8,000 – $15,000
Galvanized or Polybutylene Replacement$4,500 – $8,000

Most San Antonio homes are repiped with PEX, which resists hard water and clay soil movement better than copper. CSW confirms the schedule in the written estimate. Most projects 1–2 days. Permit and inspection included.

Full-Service Contractor

C.S.W. Power Solutions is more than a plumbing contractor. As a general contractor, we also provide electrical services in-house; for HVAC-related needs, scope and availability are confirmed before work. Projects that require multiple trades — like bathroom remodels or water damage restoration — are managed under one roof for faster completion and lower cost.

Texas Electrical Contractor TECL #31793Responsible Master Plumber RMP #46592Texas Air Conditioning and Refrigeration Contractor TACLA00026479R (commercial refrigeration endorsement)
Repiping

Frequently Asked Questions

How much does it cost to repipe a house in San Antonio?

Whole-house repiping in San Antonio typically costs $4,000 to $15,000 depending on the size of the home, number of fixtures, pipe material (PEX vs copper), and accessibility of existing pipes. A 1,500 square foot home with standard access usually falls in the $5,000 to $8,000 range. C.S.W. Power Solutions provides a detailed, itemized estimate before any work begins.

What are the signs that my house needs repiping?

Signs your home needs repiping include frequent leaks in different locations, discolored or rusty water, low water pressure throughout the house, visible corrosion on exposed pipes, pinhole leaks, water that tastes or smells metallic, and pipes that are older than 40 years (galvanized steel) or 50 years (copper). If your San Antonio home was built before 1980, the pipes should be inspected.

How long does whole-house repiping take?

Most whole-house repiping projects take 2 to 5 days depending on the size of the home and complexity of the plumbing system. A typical 3-bedroom home is completed in 2 to 3 days. Water is usually off for only portions of each day, and we coordinate to minimize disruption. C.S.W. Power Solutions handles all permitting, inspection, and drywall patching as part of the project.

Should I choose PEX or copper for repiping?

Both PEX and copper are excellent choices. PEX is more affordable, faster to install, resistant to corrosion and scale buildup, and flexible enough to reduce the number of joints. Copper is more durable long-term, has a proven track record, and adds value to the home. For most San Antonio homes, we recommend PEX for its cost-effectiveness and resistance to the area's hard water. C.S.W. Power Solutions installs both materials and can advise based on your specific situation.

Do I need to move out during repiping?

You do not need to move out during repiping. Water is turned off during active work hours but is restored each evening. There will be some noise from cutting drywall and running new pipe, and some areas of the home will have temporary openings in walls. Most homeowners stay in the home during the project without significant inconvenience.

Does repiping require permits in San Antonio?

Yes. Whole-house repiping requires a plumbing permit from the San Antonio Development Services Department. The work must be performed by a licensed plumber and pass city inspection. C.S.W. Power Solutions (plumbing work performed under Responsible Master Plumber RMP #46592) handles all permitting and scheduling of inspections as part of every repiping project.

Ready to Repipe Your Home?

Contact C.S.W. Power Solutions for a free repiping estimate. Call 210-880-2864 or book online.

Free Written Estimates · Veteran-Owned

Online estimate appointments need at least 24 hours' notice. Need help sooner? Call 24/7: (210) 880-2864.

Veteran-, Family- & Minority-OwnedTexas Electrical Contractor TECL #31793Responsible Master Plumber RMP #46592

Prefer to pick a time? Book online.

Books a free on-site estimate consultation at an open time on our Calendly schedule. It is not a repair dispatch — for anything urgent, call us.

Online estimate appointments need at least 24 hours' notice. Need help sooner? Call 24/7: (210) 880-2864.